If your work demands serious towing and hauling, the 2026 GMC Sierra 2500 HD and 3500 HD were built for exactly what you do. Whether you’re pulling a loaded livestock trailer out of Dodge City, hauling heavy equipment across the Kansas plains, or running a flatbed from Garden City to Wichita, these trucks deliver the muscle and technology to get the job done right. At Robert Brogden’s Garden City GMC, located at 409 E Fulton St in Garden City, KS, the full 2026 Sierra HD lineup is here and ready to work.
Built for Western Kansas: Meet the 2026 GMC Sierra 2500 HD
The 2026 GMC Sierra 2500 HD is the heavy-duty truck for buyers who need maximum capability without stepping up to a full Class 3 machine. With a maximum towing capacity of 22,390 lbs and a payload of up to 4,049 lbs, it handles the kind of loads that would leave a half-ton truck sweating. Whether you’re towing a horse trailer from Scott City or running a large enclosed cargo trailer across the region, the 2500 HD stays composed and in control.
The standard 6.6L V8 gas engine produces 401 horsepower and 464 lb-ft of torque, paired with a smooth-shifting Allison 10-speed automatic transmission. That combination delivers confident acceleration under load and better fuel management across long highway miles — important when you’re covering ground between Garden City, Great Bend, and Pratt on a regular basis.
Go Heavier: The 2026 GMC Sierra 3500 HD for Serious Hauling
When the job requires more, the 2026 GMC Sierra 3500 HD steps up in a serious way. With gooseneck towing capacity reaching 36,000 lbs and a maximum payload of 7,290 lbs, this is the truck for large grain hoppers, commercial equipment, and heavy livestock rigs common across Western Kansas and into the Oklahoma Panhandle near Guymon.
The 3500 HD is also available with dual rear wheels (dually configuration), which adds lateral stability under heavy gooseneck and 5th-wheel loads. If your operation regularly moves loads that push the upper limits of what any truck can tow, the 3500 HD is the right tool for the job.
Diesel or Gas? Choose the Right Engine for Your Work
Both the Sierra 2500 HD and 3500 HD are available with the legendary Duramax 6.6L Turbo-Diesel V8, which cranks out a massive 975 lb-ft of torque — paired with that same Allison 10-speed automatic. That torque figure is especially relevant when you’re climbing grades or pulling fully loaded trailers at lower speeds where diesel torque shines.
The gas 6.6L V8 is an excellent choice if you’re doing lighter-duty towing, want simpler maintenance, or are more budget-conscious on the front end. Your Brogden sales team can walk you through the towing math based on what you’re actually hauling and help you choose the engine that makes the most sense for your operation.
Both trucks also come equipped with GMC’s ProGrade Trailering System, which includes up to 14 camera views — including a transparent trailer view — making hookup and lane changes safer and less stressful, even when you’re doing it solo.
Why Western Kansas Chooses Brogden’s Garden City GMC
At Robert Brogden’s Garden City GMC, we understand the demands of farm, ranch, and contractor work in Western Kansas. Our team knows the difference between a buyer hauling cattle to Lamar and a contractor running heavy equipment between Ulysses and Liberal — and we’ll help you spec the right truck for your exact needs.
We carry the full 2026 Sierra HD lineup from the work-ready Pro trim through the premium Denali Ultimate, with options including the rugged AT4 and AT4X for buyers who need off-road capability alongside max towing. And with trim levels starting in the mid-$40s, there’s a Sierra HD for every budget and every job.
We’re conveniently located at 409 E Fulton Street in Garden City — easy to reach from Dodge City, Great Bend, Scott City, and the surrounding Western Kansas region. Give us a call at (620) 275-4291 to check current inventory or get answers to your questions before you come in.
See the 2026 Sierra HD Lineup in Garden City Today
The 2026 GMC Sierra 2500 HD and 3500 HD are in stock at Brogden’s Garden City GMC and ready for a test drive. Whether you’re replacing a high-mileage work truck or upgrading to a heavier-duty rig for a growing operation, this is the right truck to look at.
Stop by 409 E Fulton St, Garden City, KS 67846, call us at (620) 275-4291, or browse current inventory. Our team is ready to put you in the right Sierra HD — no pressure, just straight answers from people who know trucks and know Western Kansas.
Frequently Asked Questions About the 2026 GMC Sierra HD
Q: What is the towing capacity of the 2026 GMC Sierra 2500 HD?
The 2026 GMC Sierra 2500 HD can tow up to 22,390 lbs when properly equipped — more than enough for most agricultural and contractor towing needs. Actual capacity depends on cab, bed, engine, and axle configuration; the Brogden team can help you spec for your exact load.
Q: What is the towing capacity of the 2026 GMC Sierra 3500 HD?
The 2026 GMC Sierra 3500 HD achieves up to 36,000 lbs of gooseneck towing capacity when properly equipped — ideal for large livestock trailers, grain hoppers, and heavy equipment common across Western Kansas and into the Oklahoma Panhandle and Eastern Colorado.
Q: Is the Duramax diesel engine available on the 2026 Sierra HD?
Yes. The available Duramax 6.6L Turbo-Diesel V8 delivers 975 lb-ft of torque and is paired with the Allison 10-speed automatic. It’s the go-to engine for buyers who need maximum pulling power on demanding hauls across long, flat distances.
Q: What cab and bed configurations are available on the 2026 Sierra HD?
The 2026 GMC Sierra HD is available in Regular Cab, Double Cab, and Crew Cab configurations with standard and long bed options. The Sierra 3500 HD also offers a dual-rear-wheel dually setup for maximum payload stability under gooseneck and 5th-wheel loads.
Q: Where can I test drive a 2026 GMC Sierra HD near Dodge City or Garden City, KS?
Robert Brogden’s Garden City GMC at 409 E Fulton St, Garden City, KS 67846 carries the full 2026 Sierra HD lineup. Call (620) 275-4291 or visit brogdengardencitygmc.com to check inventory and schedule a test drive.
Ready to Put the 2026 Sierra HD to Work?
Visit Robert Brogden’s Garden City GMC and see the full 2026 GMC Sierra 2500 HD and 3500 HD lineup in person. Our knowledgeable team is here to help you find the right truck for the right job — whether that’s a Pro trim workhorse or a fully loaded Denali Ultimate.
📍 409 E Fulton St, Garden City, KS 67846 | 📞 (620) 275-4291 | 🌐 brogdengardencitygmc.com
Connect with us
- August 2026
- July 2026
- June 2026
- May 2026
- February 2026
- January 2026
- October 2025
- September 2025
- August 2025
- July 2025
- June 2025
- May 2025
- April 2025
- March 2025
- February 2025
- January 2025
- December 2024
- November 2024
- October 2024
- September 2024
- August 2024
- July 2024
- June 2024
- May 2024
- April 2024
- March 2024
- February 2024